case: jedec do-201ad molded plastic body terminals: plated axial leads, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mounting position: any weight: 1.10 grams ratings at 25 c ambient temperature unless otherwise specified. single phase half-wave 60hz,resistive or inductive load,for capacitive load current derate by 20%. ? guardring for overvoltage protection ? very small conduction losses ? extremely fast switching ? low forward voltage drop ? high frequency operation ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec note: 1.measured at 1mhz and applied reverse voltage of 4.0v d.c. 2. thermal resistance from junction to ambient at 0.375 ? (9.5mm)lead length,p.c.b. mounted parameter symbol s r 8 20 s r 8 30 s r 8 40 s r 8 50 s r 8 60 s r 8 70 s r 8 80 s r 8 90 s r 8 100 s r 8 150 s r 8 200 unit v rrm 20 30 40 50 60 70 80 90 100 150 200 volts v rms 14 21 28 35 42 49 56 63 70 105 140 volts v dc 20 30 40 50 60 70 80 90 100 150 200 volts i (av) amp i fsm amps v f 0.95 volts i r c j pf r ja /w t j maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current 0.375?(9.5mm) lead length peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 8 .0a maximum dc reverse current ta=25 at rated dc blocking voltage t a =100 typical junction capacitance (note 1) typical thermal resistance (note 2) operating junction temperature range storage temperature range t stg 25 .0 -65 to +125 -65 to +150 ma 20 .0 10 .0 2 .0 500 .0 400 .0 8 .0 15 0 0.85 0.2 -65 to +150 0.55 0.7 0 0.5 SR820 thru SR8200 features mechanical data maximum ratings and electrical characteristics http://www.trr-jx.com schottky barrier rectifiers dimensions in inches and (millimeters) do-201ad() do-201ad(do-27)
10 number of cycles at 60 hz average forward rectified current, amperes peak forward surge current, amperes 1 0 0 ambient temperature, c instantaneous forward current,amperes instantaneous forward voltage, volts percent of peak reverse voltage,% instantaneous reverse current, microamperes 1 0.2 0.4 0.6 0.8 1.0 1.1 0 20 40 60 80 100 0 25 50 75 100 125 150 175 100 10 1 0.1 0.01 0.001 tj=25 c tj=100 c tj=75 c 8 6.4 4.8 3.2 1 .6 0 single phase half wave 60hz resistive or inductive load s r 8 70-s r 8 200 s r 8 20-s r 8 60 150 125 100 75 50 25 8.3ms single half sine-wave (jedec method) 0.01 0.1 1 20 10 t j =25 c pulse width=300 m s 1%duty cycle s r 8 50-s r 8 60 s r 82 0-s r 8 40 s r 8 70-s r 8 150 s r 8 200 http://www.trr-jx.com schottky barrier rectifiers ratings and characteristic curves fig.1-typical forward current derating curve fig.3-maximum non-repetitive forward surge current fig.2-typical forward characteristics fig.4 - typical reverse characteristics SR820 thru SR8200
|